FAQ for TILLvisION

How do I enable the high-gain mode of the Imago QE camera?

To enable the gain mode (Low light mode) of the Imago QE camera in TILLvisION 4.0.x or earlier, you have to open the

"tillpitp.ini"

file.

The "tillpitp.ini"-file is located in the "c:\programs\tillvision\program"-folder.

HINT: the drive letter might differ from system to system as will the first folder "programs" be different on different language versions of windows.

To enable the gain mode you might have to add a line in the

[default]

section of the INI-file.
In case that there is no line with

highgain=0

, add one.

To enable the high-gain mode you have to replace the "0" with "2" (without the quotes).